SETH THOMAS ANSONIA KIENINGER HERMLE JAUCH
CLOCKS AND CLOCK PARTS - NEW AND OLD

Call: 215 721-3076
Hours by appointment for our walk in customers

Hermle 140-020 75cm
 
NEW OLD STOCK (BOXED)
Replacement movement - use your old pendulum leader
Picture is of actual movement
$65.00
 Shipping $9.50
sku# Hermle 140-020 75cm

3 AVAILABLE

Hermle 131-030 21cm
 
NEW OLD STOCK in box
Replacement movement - use your old pendulum leader
$65.00
   Shipping $9.50 - $2.25 each additional
sku# Hermle 131-030 21cm

5 AVAILABLE
7 AVAILABLE
20+  131-03 AVAILABLE
20 AVAILABLE

351-030A 25cm New Old Stock -  Boxed      $125.00 Shipping $12.00
sku# Hermle 351-030A 25cm

351-030 45cm New Old Stock -  Boxed      $105.00 Shipping $12.00
sku# Hermle 351-030 45cm
nk

Hermle Grandfather Dial
"THE MOONS AGE"
 Fits Hermle 461-053 Westminster Chime
Will fit the 1161-853 TRIPLE CHIME but a rod must be attached to the chime selector on the movement which then hangs down in the case. You ten push up on down on the rod to select the chime
 This dial does not have a cut out long enough for a triple chime movement selector switch 

The dial is 15 1/2" x 11
$65.00
Shipping $16.00
sku#moonsage
es

Simon WIllard Presentation Grandfahter Clock Henry Ford Museum
Made by Sligh

Moon Dial Gear Grandfather Clocks
Movement 1161-xxx and other Hermle that have a smaller diameter hand shaft
Attaches to the center shaft on Hermle Grandmother movements to advance the moon dial
 4.7mm inside dia - 20 teeth.
$9.50
Shipping $2.95
sku#Hermle moon gear
i.en

SOLD OUT

DIALS FOR THE HERMLE 1161 CABLE WOUND GRANDFATHER MOVEMENT

If the backplate of your Grandfather movement has 1161 as show in the picture to the left these dials will fit.
Sometimes a small mirror and flashlight will help to identify the movement

Hermle Grandfather Dial 13 7/8" in height
9 13/16" across
Quality German made dial
for 33mm handshaft
$70.00
Shipping $12.00 - 3.75 each additional
sku# Hermle Grandfather dial 33 handshaft

<<<<<

Hermle 141-020 52cm
 
NEW OLD STOCK (BOXED)
Replacement movement - use your old pendulum leader
$65.00
  Shipping $9.50
sku# Hermle 141-020 52cm

Chime Rods
 For the above movement or any Bim Bam 3 Hammer Movement

 (Side Mount) Mounts on the inside wall of your clock case
Total length 9 3/8" - Longest Chime rod 8 1/4"
$18.00
  Shipping $7.00
sku# chime rods bb
v

Moon Dial Gear Grandfather Clocks
Movement 471-xxx and other Hermle movements that have a large diameter center shaft
Attaches to the center shaft on Hermle Grandfather movements to advance the moon dial
 7.5 mm inside dia - 20 teeth.
$9.50
Shipping $2.95
sku#Hermle moon gear
i.en

SOLD

Hermle 141-020 75cm NEW OLD STOCK (BOXED)
Replacement movement - use your old pendulum leaser
$65.00
   shipping 9.50
sku# Hermle 141-020 75cm

Simon Willard Dial NEW for a Hermle 1171 movement in perfect condition
The dial is 15 5/8" x 11
Calender wheel above the winding arbor
$110.00
Shipping $16.00
sku#Simon Willard Dial
nr

Outside the U.S
Please do not place a order without getting a shipping quote first
We only charge the actual cost to ship but it can be costly
Minimum order $75.00

SOLD

PAYING WITH A MAJOR CREDIT CARD?
Select the pay-pal button located with the item you are purchasing. Once selected you can use any major credit card for your purchase. No need for a pay-pal account

Hermle 451-050 94cm NEW HERMLE MOVEMENT
Comes with chains and pendulum leader
$250.00
   Shipping $12.00
sku# Hermle 451-050 new
kin

LOCATION OF MOVEMENT NUMBER
The  information that came with your clock will NOT indicate the manufactures movement number. Check the number on the back of your movement. Hermle always has them stamped on the lower right side. The upper red arrows points to the movement number and the lower one is the penudlum length.
Many manufactures of clocks used Hermle movements in there Grandfather clocks including Ridgeway, Seth Thomas and many others