SETH THOMAS ANSONIA KIENINGER HERMLE JAUCH
CLOCKS AND CLOCK PARTS - NEW AND OLD

Call: 215 721-3076
Hours by appointment for our walk in customers

3 Complete Used Chains for Jauch Large Grandfather Movements .
 Not for the Jauch 77 Grandmother movement
 Each chains is close to 63"  from tip to tip 
Links are tight. 
$35.00
  Shipping $4.50
sku# 3 jauch gf chains
n

Jauch clock movements both new old stock and overhauled Grandfather clock movements. We also have parts movements available both 5 tube and those that use chime rods.

New Old Stock Jauch Hour Strike with Wood Dial and wood pendulum, These movements have not been available for many years.
Nice setup to create your own clock.
Does not have hands but wood Cuckoo hands from a major supplier would look great with this dial.
Pendulumm length 31cm
5 3/4" wood dial
Total pendulum length 9 1/2"
$125.00
Shipping $12.00
sku#jauch bimbam complete
ve

Jauch 5 Tube Grandfather Movement
Clean straight movement
Not overhauled in the past
This movement is definitely a great movement for a overhaul or for parts
All functions work when manually tested but will need a overhaul, chime side showing wear at the cam pivot which is typical.
Comes as shown, crutch removed for shipping
No chains or pendulum leader
 
$125.00
Shipping $20.00
sku#Jauch 5 tube used
vr

Jauch Seatboard Screws
For large Plate Grandfather movements
$15.00
Shipping $3.75
sku#jauch seatboard screws

New Old Stock Emperor Grandmother Westminster Chime Rods
Used in the 100M
but will work with other Grandmother Clocks
Not for movements that have more than one chime (triple chime) only for clocks that have the Westminster chime.
Total length including the base is 19 1/2"
$31.00
Shipping $12.00
sku# Emp chime rods
kr

Jauch Moon Dial Advance
Used for the Jauch 77 Movement
19.95
Shipping $3.75
sku# j 77 moon advance

New Old Stock Jauch Hour Strike with Wood Dial and wood pendulum, These movements have not been available for many years.
Nice setup to create your own clock.
Comes complete with hands, gong, and penduilum parts. Pendulum rod must be attached to wood pendulum bob
Pendulumm length 31cm
5 3/4" wood dial
Total pendulum length 9 1/2"
$125.00
Shipping $12.00
sku#jauch 31 cm complete
eo

Jauch 77 Dial 
13" x 9 7/8"
New Old Stock dial that was made in Germany
Above average condition
Some minor discoloration at 10:00 but still shows nicely
See the 3 mounting studs that mount the dial to the movement
$50.00
Shipping $14.00
sku#j 77 dial5
kr

<==

available but on hold 5/2/2016

Jauch 78 Used Movement
For parts or repair
Triple Chime
Comes as pictured
$45.00
Shipping $12.00
sku# j 78 move
v

Used Jauch Grandfather Hands 
These hands came off a Jauch made for the Emperor clock company with a pendullum length of 110cm,
 This information is stamped on the rear plate of the movement
If the rear plate does not have this assume they will not fit the other Jauch Grandfather movements.
$35.00
Shipping $3.75
sku# jauch 110cm hands

Jauch 5 Tube Rack (Used) 
Overall in very clean condition
Came off a 5 tube Jauch clock but will also fit a Urgos 5 tube movement 
$75.00
Shipping $17.00
sku#Jauch 5 tube rack
kr

Jauch Pendulum 96 (Used) 
Overall in very clean condition
Your Jauch Grandfather movement must have a 96 stamped on the back, normally
located on the lower middle section of the back plate. Total length 30 3/4"

$45.00
Shipping $13.00
sku#Jauch gf 96
kr

Jauch 78
Pendulum leader
$20.00
Shipping $2.75
sku# jauch 78 leader
v

Jauch 78 stamped on rear of plate

New 451 Series Movement for Emperor Grandmother Clocks
New replacment movement for your Emperor Grandmother clock
Check the rear plate of your movement. If it has "451-050" last letter not important then this movement will fit.
Comes with instructions
$230.00
Shipping $14.00
sku# new emp 451mov
kir

New Old Stock Emperor Brass Grandfather Bob 6 1/2"
Over 30 years old and just unwrapped. Made for the Jauch Emperor Grandfather movement with a wood stick pendulum.
Open in back for the wood stick is shy of 1"
 $35.00
Shipping $7.50
sku# j emp gf bob
kr

Jauch Hand Nut
Used with the large Grandfather Clock movements measuring 9" x 6"
$9.95
Shipping $3.75
sku# j hand nut
k

Emperor New Old Stock Dial
If your old  Emperor movement has "451-050" last letter not important stamped on the back plate this dial will fit.
Measures 13" x 9 3/4"
Solid Brass
. $90.00
Shipping $14.00
sku# emp nos 451 dial
vr

BUYING OUTSIDE THE U.S
Please do not place a order without getting a shipping quote first
We only charge the actual cost to ship but it can be expensive
Minimum order FOR INTERNATIONAL ORDERS $75.00

New Old Stock Jauch 77 Grandmother Weight Shells
Comes with all harware, all you need is to put your old weights inside
Inside diameter 1 3/4"
Length 10 11/16" without caps
 Your old weights must have a hole going through the entire weight
$45.00
Shipping $10.00
sku#nos jauch shells
er

New Old Stock Jauch 77 Seat Board Screws
$14.95
Shipping $3.75
sku# jauch 77 mounting bolts
n

SOLD

Jauch Moon Gear
Used with the large Grandfather Clock movements measuring 9" x 6"
See measurements
$22.95
Shipping $3.75
sku# j large moon gear
n

New Old Stock Emperor Grandmother Weight Set
Shiney Brass
For the Hermle 451-050 Grandmother movement
Check the back plate of your movement for the 451-050, normally on the right side
 Complete with 3 brass shells, caps, weights and hardware
$100.00
Shipping $20.00
sku#new 451 weights 
er

Which Jauch movement do I have?
Jauch 77 movements have the number 77 stamped on the back plate. These movements where commonly used in the Emperor Grandmother clocks

PAYING WITH A MAJOR CREDIT CARD?
Select the pay-pal button located with the item you are purchasing. Once selected you can use any major credit card for your purchase. No need for a pay-pal account

New Emperor Dial 
Used for the Jauch 77 Westminster chime movement.
Perfect condition.
Measures 13" x 9/78"
 $65.00
Shipping $13.00
sku# nos 77 dial
er

New Old Stock Jauch 77 Westminster Chime Mounting Bolts 
$15.00
Shipping $3.75
sku# jauch chime bolts
n

Jauch Emperor Movement Chains
2 chains used with the Jauch Emperor Movement.
 For Emperor models 200M and 300M
In good used condition.
Each is 74" in length
$21.00 for 2
Shipping $5.50
sku# jauch emperor chains

New Emperor Dial 
Used for the Emperor GRANDFATHER movements with the Hermle 1171 movement
15 1/2" x 9 7/8"
Check the back plate of your movement. If it has 1171-xxx stamped in the back lower right then this dial will fit.
This dial has some discoloration at various spots around the outside. Exactly the same specifactions as the dial on the left.
$55.00
Shipping $14.00
sku# emp 1171 dial gold top
eu

ONLY ONE AVAILABLE

New Old Stock Jauch 77 Hands 
$19.95
Shipping $2.95
sku# jauch 77 hands
n

$18.50
$16.50

$18.50

$16.50
$16.50
$16.50

2 pieces

$5.00
Shipping $2.95

$16.50

$16.50

$16.50

$16.50

$16.50

Front & Back Plates. Includes what is shown
$16.50
Shipping $8.00

Jauch 77
3 USED chains with both ends attached
$30.00
Shipping $4.50
sku# jauch 77  used chains
kr

$24.00

$16.50

$16.50
$16.50
$16.50
$16.50
$16.50
$16.50

$16.50

16.50

$8.00
Shipping $2.95

If you see a PayPal button next to the item it's available

If you see a PayPal button next to the item it's available

$18.50

SOLD

<<<<    Jauch 77 pendulum leader

SOLD
SOLD

EMPEROR MODEL 300M TRIPLE CHIME 110CM NEW OLD STOCK MOVEMENT
Picutres shows the movement after opening the box that's been sealed for over 30 years!
Cleaned, oiled and tested.
Working perfectly
Comes with chains but use your old pendulum leader and hands.
Price $650.00
Shipping $23.00

vrr

New Emperor Dial 
Used for the Emperor Grandmother movement with the Hermle 451-050 movement
13" X 9 7/8"
Emperor number EC-2891
Check the back plate of your movement. If it has 451-050 stamped in the back lower right then this dial will fit
$85.00
Shipping $13.00
sku# emp 451 dial
vv

New Emperor Dial 
Used for the Emperor GRANDFATHER movements with the Hermle 1171 movement
15 1/2" x 9 7/8"
Check the back plate of your movement. If it has 1171-xxx stamped in the back lower right then this dial will fit
$85.00
Shipping $14.00
sku# emp 1171 dial
vu

SOLD

Picture taken from a old original Emperor instruction manual

SOLD
SOLD
SOLD

 Grandmother Weight Shells for Jauch 77
New Old Stock!
IMPROVE THE LOOK OF YOUR EMPEROR GRANDMOTHER CLOCK BY CHANGING THE WEIGHT SHELLS
These weights shells came with the Emperor Grandmother Clock kit that had the Jauch 77 movement 
  Three (3) s
hiny brass shells
Includes everything except
the weight inserts just use your old inserts
Could show signs of age but no dings or dents
$69.50
Shipping $10.00
sku# jauch 77 gm shells

 Jauch Triple Chime Rods
Longest rod for the chime is in the rear and shortest in the front. Taken from a Grandfatrher/Grandmother case that had a Jauch 78 triple chime  movement .
 26 1/4" longest rod
$65.00
Shipping $13.00
sku# jauch chime rods

Jauch Triple Chime Cable Movement
Marked Seth Thomas A407--002-A
I do not know the history of this movement but if it's used it shows no wear at the obvious points. Made for Seth Thomas by Jauch. Untested, good source for parts or repair
$47.50
Shipping $11.00
sku# st jauch A407
er

Looking for   EMPEROR clock parts?
Emperor used URGOS for Grandfather movements and other parts
after JAUCH went out of business so
also check the "URGOS/USED NEW" page

 Jauch 77
Weights 
Used weights for the Jauch 77 movements that Emperor and some other used in the Grandmother clocks. Each is the proper weight for this movement. All three weights are close to perfect in apperance.
  Three (3) s
hiny brass
$95.00
Shipping $20.00
sku# jauch 77 weights

SOLD
SOLD

Jauch 78
3 complete used chains
$33.00
Shipping $3.75
sku# jauch 78 chains
v

Jauch 78
Moon gear, 37 tooth.
Advances the gear in 2nd picture
$19.95
Shipping $3.75
sku# j 78
 moon advance
v

New Old Stock Jauch 78
Double chime not the typical triple chime movement.. This movement was made by Jauch for the Trend Clock Company which was later purchased by the Sligh Clock Company
It has the Westminster chime and either the Ave-Marie(Gounod) chime or the Ave-Marie (Schubert) chime
Just cleaned and oiled from extended storage.
Comes as pictured, no chains or hands. This New old stock movement is a perfect replacement for your worn 78 movement but you will need to use your chains, pendulum and hands.
Tested for one week with the proper weights and pendulum and worked perfectly.
$295.00
Shipping $13.00
sku#nos jauch 78
nn

NEW OLD STOCK JAUCH 9 TUBE MOVEMENT

New Emperor Movement Holder
Holds either the Jauch 77 Westminster movement or the Hermle 451-050 movement.
The movement get mounted in the holder then the holder goes into the case.
Measures 13 7/8" x 10 7/8"
$37.50
Shipping $10.00
sku# emp mov holder
kn

EMPEROR MODEL 120 SERIES GRANDMOTHER KIT IN CHERRY
READY TO ASSEMBLE
INCLUDES EVERYTHING INCLUDING MOVEMENT,INSTRUCTIONS,HARDWARE & PENDULUM
PREFER PICKUP AT OUR LOCATION IN PA.
$500.00

New Old Stock
Jauch Spring Driven Time Only Movemen For Wall Clocks
Use to replace your old worn movement that no longer works
Must use your old hands, suspension spring and pendulum leader
Your old movement must have "PL 61cm" on the back plate for the pendulum length to be correct
$40.00
Shipping $7.50
sku# jauch 61cm
kr

New Old Stock Emperor 300M Dial
15 5/8" x 11
Over 30 years old and just unwrapped. Made for the Westminster 110cm Jauch Emperor movement
8 3/16" (+/-) on center for the bottom dial feet.
7 1/8" (+/-) on center for top dial feet
 $130.00
Shipping $18.00
sku# j emp gf dial
vr

New Jauch/Emperor Pendulum
We made a few of these from the requests we receive for a complete pendulum assembly for the Jauch/Emperor 200m & 300m movements.
Each has the correct bob size, length and pendulum hook top for the pendulum leader that came with this movement. Each one is stained and finished in satin.
 $70.00
Shipping $15.00
sku# j 200 300 pendulum
vv

New Old Stock Emperor Brass Grandfather Weight Shells
Over 30 years old and just unwrapped.
9 5/8" not including the top hook or bottom nut.
Obviously perfect, these are brass not brass tone like the new shells of today.
 $95.00
Shipping $12.00
sku# j emp gf shells
er

 200M  Jauch Emperor Movement
200M (Westminster)
300M (triple chime)

Pendulum leader
must look like this one for 200M or 300M

Pendulum leader
for 200M or 300M

sold out

SOLD

EMPEROR MODEL 200M WESTMINSTER CHIME 110CM NEW OLD STOCK MOVEMENT
Picutres shows the movement after opening the box that's been sealed for over 30 years!
These movement have been totally disassembled and all pivot and pivot holes cleaned of all old lubricant then reassembled and tested for proper function. Comes with chains.
Use your old pendulum leader and hands.
Price $550.00
Shipping $23.00

on 

SOLD
SOLD
Pendulum Leader
SOLD
SOLD
SOLD
SOLD

sold out

New Old Stock Jauch/Emperor Pendulum Leader
Pendulum leader for the model 200M or 300M Grandfather clock movement.
 These have not been available for ove 30 years but we have a few which are new old stock.
The movement these fit is a  Erhard Jauch movement made for the Emperor clock company which is stamped in the rear plate, hard to read becasue it's very small. The movement measures  9" x 6 3/4" 
 $39.50
Shipping $3.75
sku# j emperor leader
kv