Gilbert Porcelain Case Mantel Clock Movement
If your serious about replacing your worn movement with a high quality rebuilt movement consider one of ours. Every pivot, lever and tooth is inspected for defects and repaired or replaced if needed providing you with a movement as close to factory new as you can find anywhere.
Our movements are simply the best rebuilt movements you will find anywhere period! We take NO shortcuts on the overhaul process and have a extensive used parts inventory should a defective part have to be replaced.
The Gilbert movement pictured was just rebuilt by us and shows where new Bergeon bronze bushings where installed, see picture with the red circles.
Prior to installing new Begeon bronze bushing all pivots where polished using a Rollimat pivot polisher, a tool specifically designed for polishing pivots of all the defects. When finished every pivot is perfectly round again and has a mirror like finish, a thing of beauty.
We then assemble and test the movement for at least one week prior to oiling the pivots with the best synthetic clock oil. We have always tested our movements without oil for at least a week so not to hide and potential binding problems.
Your newly overhauled movement will provide many years of dependable service, all you have to do is wind it up and enjoy.
This Gilbert movement is for a porcelain case
See picture with red circles indicating new bronze bushings on the back and front plate.
See picture with the blue arrows indicating the studs for mounting the movement to the case
Strikes the hours on the hour and once for the half hour
See pictures for distances for the winding arbors and center shaft (where the hands attach) to the center shaft.
Comes as pictured.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD