Ingraham Mantel Clock Movement
If your serious about replacing your worn movement with a high quality rebuilt movement consider one of ours.
We do not take shortcuts by only doing the minimum amount of work on our movements,. Every pivot, lever and tooth is inspected for defects and repaired or replaced if needed providing you with a movement as close to factory new as you can find anywhere.
We use Bergeon bronze bushings when new bushings are installed and polish all pivots with the Rollimat pivot polisher
This Ingraham movement get mounted on the back of a wood box structure as shown in the pictures.
Ingraham did this on some of there mantel clocks, not very common.
Please see pictures for measurements of the winding arbors and center shaft (where the hands attach) Ingraham did manufacture this type of movement in different hand shaft lengths.
Also notice the fast/slow adjuster is located above the center shaft (where the hands attach)
See picture of the red circle indicating where new bronze bushings where installed on the front and back plates
Strike once on the half hour and strikes the hours on the hour.
TESTED AND RUNS GREAT!
Does not come with the wood box structure.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD